ONLINE PREPARATION OF G-CODE FOR TURNING CNC

LOCATION OF THE REVOLVER HEAD OF THE TOOL
In front of the spindle Behind the spindle

DESIGN - TECHNOLOGICAL ELEMENTS OF THE PART (KTE)

reference: If the cone is given by 2 diameters, then in the field a: enter the 2nd diameter and click on the field d:. If no diameter is entered in the subsequent cylinder, the diameter of the previous cylinder will be taken

CYLINDER1 N
D: L: Work piece
r1: l1: a1:
r2: l2: a2:
q: s: finger: CYLINDER-2 N
D: L:
r1: l1: a1:
r2: l2: a2:
q: s: a2=d: CYLINDER-3 N
D: L:
r1: l1: a1:
r2: l2: a2:
q: s: a2=d: CYLINDER-4 N
D: L:
r1: l1: a1:
r2: l2: a2:
q: s: a2=d:

GROOVE-1 N
L: k: h:
kr: n: z:
Left r: l: a:
Right r: l: a:
GROOVE-2 N
L: k: h:
kr: n: z:
Left r: l: a:
Right r: l: a:
GROOVE-3 N
L: k: h:
kr: n: z:
Ledt r: l: a:
Right r: l: a:
GROOVE-4
L: k: h:
kr: n: z:
Left r: l: a:
Right r: l: a:

HOLE-1 N
D: L: k qual:
r1: l1: a1:
r2: l2: a2:
q: s: a1=d:
HOLE-2 N
D: L: k qual:
r1: l1: a1:
r2: l2: a2:
q: s: a1=d:
HOLE-3 N
D: L: k qual:
r1: l1: a1:
r2: l2: a2:
q: s: a1=d:
HOLE-4 N
D: L: k qual:
r1: l1: a1:
r2: l2: a2:
q: s: a1=d:

GROOVE-5
L: k: h:
kr: n: z:
Left r: l: a:
Right r: l: a:
GROOVE-6
L: k: h:
kr: n: z:
Left r: l: a:
Right r: l: a:
GROOVE-7
L: k: h:
kr: n: z:
Left r: l: a:
Right r: l: a:
GROOVE-8
L: k: h:
kr: n: z:
Ledt r: l: a:
Right r: l: a:

INITIAL PARAMETERS

DEVICE SCREEN:
Width - Height -:

PICTURE:
Decrease in Increase in

WORKPIECE OF DETAIL :
Diameter - Length - Clip length -

CUTTER HOLDER:
Height - Width -

TOOL CHANGE POINT
X: Z:

SETTINGS

If no parameters are entered, the system will generate their values automatically

ROUGHING THE OUTER CONTOUR
Depth of the layer to be removed:
The spindle speed: Fedrat:
PROCESSING OF INTERNAL CONTOUR
The spindle speed: Fedrat:
PROCESSING OF INTERNAL CONTOUR
drill of centering
Diameter spiral drill:
The spindle speed: Fedrat:
Hole boring
Depth of the layer to be removed:
The spindle speed:: Fedrat:

SHOW OTHER TYPES OF PROCESSING

Cutting groovesCutting grooves
Depth of the layer to be removed:
The spindle speed:: Fedrat:
Threading
Depth of the layer to be removed:
Allowance for finishing:
The spindle speed:
Cut of detail:
Width of the cutting edge:
The spindle speed: Fedrat:

NUMERICAL CONTROL SYSTEM
FANUC

OUTPUT OF G-CODE, DRAWING

Cutting the end face
External outline rough
External contour finishing
External thread
The outer contour of the groove
Internal outline rough
Internal contour finishing
Thread of Internal contour
The groove of Inner contour
The cut of Detail
Part without processing

CYLINDER1 N D: L: Work piece r1: l1: a1: r2: l2: a2: q: s: finger:	CYLINDER-2 N D: L: r1: l1: a1: r2: l2: a2: q: s: a2=d:	CYLINDER-3 N D: L: r1: l1: a1: r2: l2: a2: q: s: a2=d:	CYLINDER-4 N D: L: r1: l1: a1: r2: l2: a2: q: s: a2=d:
GROOVE-1 N L: k: h: kr: n: z: Left r: l: a: Right r: l: a:	GROOVE-2 N L: k: h: kr: n: z: Left r: l: a: Right r: l: a:	GROOVE-3 N L: k: h: kr: n: z: Ledt r: l: a: Right r: l: a:	GROOVE-4 L: k: h: kr: n: z: Left r: l: a: Right r: l: a:
HOLE-1 N D: L: k qual: r1: l1: a1: r2: l2: a2: q: s: a1=d:	HOLE-2 N D: L: k qual: r1: l1: a1: r2: l2: a2: q: s: a1=d:	HOLE-3 N D: L: k qual: r1: l1: a1: r2: l2: a2: q: s: a1=d:	HOLE-4 N D: L: k qual: r1: l1: a1: r2: l2: a2: q: s: a1=d:
GROOVE-5 L: k: h: kr: n: z: Left r: l: a: Right r: l: a:	GROOVE-6 L: k: h: kr: n: z: Left r: l: a: Right r: l: a:	GROOVE-7 L: k: h: kr: n: z: Left r: l: a: Right r: l: a:	GROOVE-8 L: k: h: kr: n: z: Ledt r: l: a: Right r: l: a: